usage method

1. First, add water to the mixing bucket, and then gradually add the binder in a ratio of 1 part water+4 parts dry powder. Stir evenly without any lumps.

2. After 15 minutes of hydration (standing), stir again for 1-3 minutes before use. The hydrated binder cannot be added with water or dried powder.

3. The mixed adhesive should be used up within 4 hours and stirred every half hour to maintain good operability. The cured adhesive is prohibited from use.

4. The already installed tiles cannot be moved after 15 minutes. If adjustment is required, the adhesive on the back of the tile and the construction surface needs to be removed and re pasted with adhesive.

keep in storage

This product should be stored in a cool and ventilated place at 5-25 ° C, and the standard storage period is 12 months.

Reference dosage

1 square meter (coated twice, with a coating thickness of about 2mm) requires about 1.4kg, and 1 bucket (coated twice, with a coating thickness of about 2mm) can apply about 13 square meters; The actual consumption varies depending on the flatness of the base layer, coating thickness, and construction method.

matters needing attention

1. After 24 hours of construction, surface follow-up construction (joint filling) can be carried out, but vibrating machinery cannot be used on the construction surface. After 7 days, there will be a certain strength, and the highest strength will be reached after 28 days.

2. This product contains cement ingredients. If it accidentally splashes into the eyes, it should be rinsed with clean water or promptly treated at the hospital.

3. During construction and 48 hours after construction, water should not be sprayed, and the temperature should be between 5 ℃ and 35 ℃.

4. The transportation of this product shall be handled in accordance with the "Regulations for the Transport of Non Dangerous Goods".

Execution standards

Technical standards: JC/T547 & nbsp;& nbsp; Environmental standards: GB50325-2010