Huigao "vitrified tile back glue" strong back coating glue takes macromolecule lotion as the base material, which has good permeability, can fully soak the surface of materials, increase the bonding force between tiles and walls, buffer the stress caused by shrinkage between bonding mortar and tiles, and effectively prevent tiles from hollowing out. This product is a green and environmentally friendly product.
Glazed tile backing adhesive
HuiGao building materials products include a series of building auxiliary materials such as putty powder series, gypsum powder series, wall fixation, ground fixation, crack resistant mortar, waterproof slurry, ceramic tile adhesive, ceramic joint agent, etc.
Product features
scope of application
This product is suitable for laying various types of indoor tiles, especially for tiles with low water absorption, and the bonding effect is particularly obvious; Suitable for tile bonding in areas such as bathrooms, kitchens, balconies, basements, and corridors.
PRODUCT INFORMATION
Construction requirements | Clean the back of the tiles thoroughly, use a brush to evenly apply this product to the back of the tiles, and wait for it to dry before construction (after there are no liquid objects) This product should be directly applied to the back of the ceramic tiles without adding anything (including water and cement) The construction temperature should be above 5 ℃, and any unused adhesive should be sealed and stored |
Usage and dosage | Adhesive for bonding: Apply this product evenly on the bonding surface, wait for it to dry slightly, then stick it together, and press it with a fixture or heavy object. After it dries, remove the fixture or heavy object. ◆ Auxiliary adhesive: First dilute this product (dilution ratio: white latex: water=1:2-3), then mix the diluted adhesive and powder evenly. During the mixing process, glue should be added first, followed by powder. The amount added should be based on the appropriate consistency for construction. |
keep in storage | This product should be stored in a cool and ventilated place at 5-25 ℃, and the standard storage period is 12 months |
Execution standards | Technical standards: JC/T 907-2002 Environmental standards: GB/T 24267-2009 |
1. Brushing construction is convenient.
2. Has good permeability.
3. Good adhesion and strong bonding force.
4. Stress caused by shrinkage between the buffering adhesive mortar and ceramic tiles.
Construction procedure
