Solid sand treasure is a highly permeable water-soluble product designed to treat surface looseness caused by poor construction, sand return, low wear resistance, and low strength on existing cement substrates.
CONCRETE INTERFACE TREATING AGENT
HuiGao building materials products include a series of building auxiliary materials such as putty powder series, gypsum powder series, wall fixation, ground fixation, crack resistant mortar, waterproof slurry, ceramic tile adhesive, ceramic joint agent, etc.
Product features
scope of application
Mainly used for sanding treatment of concrete and cement surfaces, improving the surface strength of concrete and cement surfaces, and having the functions of reinforcing base surfaces, waterproofing and moisture resistance. It is widely used in industrial plant road surfaces, exterior walls, and bridge floors.
PRODUCT INFORMATION
Base treatment | 1. Clean the dust and loose substances on the ground, and wet the ground with clean water. 2. When the ground is semi dry, use a roller bucket, brush, etc. to fully wet the surface of the sand fixing treasure. Depending on the substrate, it can also be directly painted. |
Construction technology | 1. Dilute the material with double the amount of water according to the situation, which can be done by spraying or coating construction. When constructing on a surface with severe sanding, the immersion construction method can be used. Pour the diluted material directly onto the surface, and then sweep it back and forth with a broom to allow the sand sealing agent to fully penetrate. 2. During construction, the base surface should be dry and there should be no damp or visible water. If there is visible or damp water, the sand sealing agent should be used for construction when the ground is dry. 3. After construction, it should be ensured that there is no rain or water flushing within 24 hours. |
precautions | Store in a ventilated, dark, and dry place with a room temperature not lower than 5 ℃. The shelf life is 12 months. The product is non-toxic and non flammable, and storage and transportation can be handled in accordance with the Non Dangerous Goods Regulations. |
Execution standards | Technical standards: JC/T907-2018 Environmental standards: GB18582-2020 |
Directly sprayed onto the concrete surface layer, penetrating into the interior of the concrete, activating the cement hydration reaction, thereby improving the water tightness and strength of the concrete, making the base layer firm, enhancing the bonding strength of the base layer, improving the compressive and wear-resistant properties of the base layer, and having good waterproof and moisture-proof effects. It can be used as a base layer moisture-proof agent. At the same time, it has good adhesion with different substrates and can also be used as an interface treatment agent.
Construction procedure
